This is a site dedicated to unique and vintage lighting, effects and controllers. We also repair, maintain, sell and broker classic lighting and DJ equipment. Brought to you by VNC Lighting Systems.







Follow us on Facebook

Vintage Nightclub Lighting Current Ebay Auctions:

Contact Vintage Nightclub Lighting

To contact Vintage Nightclub Lighting Email vintagediscolighting@gmail.com

Sunday, July 14, 2013

Coemar Baby Color System


A very cool set of classic color changers from Coemar!  This is the Baby Color system which features 1 master head and 3 slave units.  The units connect together with a 9 pin cable from the master to the slave units.  The system can be controlled DMX or 0 – 10 volt analogue with connection to the master unit through 3 pin XLR connection.  Also a dedicated controller was available back when these were new as well.  Each unit has a 120 volt, 250 watt ENH lamp and 10 dichoric colors mounted on a rotating carousel.   There is a changeable gobo wheel in each head with 5 gobos plus open that can be selected manually.  Each head is fan cooled due to the intense 250 watt lamp in such a small housing.  Great system made in Italy.      

























Saturday, July 13, 2013

T.A.S. (Coemar) Multipoint

Another classic moonflower from t.a.s. (Coemar)!  This is the Multipoint unit that features a very large dichoric colored dish that rotates to the beat of the music via the onboard microphone.  Control can also be achieved from direct input to an audio source connected to the rear of the unit through a ¼” plug.  The lamp is a common 24 volt, 250 watt EVC capsule.  This unit, like other large t.a.s. units has no fan.  Since the chassis is made of solid aluminum it acts like a giant heat sink to dissipate the heat.  Great unit made in Italy. 
 













Meteor Cobra 3 Color



Great unit from METEOR. Just like the original Cobra 3 unit this is built like a tank!  The fixture is housed in a large round dish with 8 large convex lenses where the light emits from. Internally the unit has 3 - 40 volt, 150 watt FVN lamps that rotate to the beat of the music. I think I am going to do a lamp retrofit on this one since the 40 volt lamps are hard t come by.  The output is 24 large beams of light that rotate and dance to the music.  This unit adds 3 large dichoric lenses for colored operation.  The original Cobra 3 is white only.  A unique feature of this unit is that it does not contain the regular slip ring/brush assemblies that are in most units. This unit has a special flat wire system around the shaft for the lamps (See pictures). Unit made here in the US.













Friday, July 12, 2013

LyteQuest Motorcolour Units



Very cool color changer system from LyteQuest.  These are the Motorcolour units.  Each unit features 1 X 120 volt, 250 watt ENH lamp with a 12 position with white (Open) color wheel located in front of the lamp. The units feature DMX and auto sound to light operation.  Each unit is 3 channel DMX with 1 channel for dimmer, 1 for color and 1 for strobe.  Awesome compact units made in Taiwan.     
 












The difference between the Martin Starflash and the Martin Starflash III



 
So the question has been asked many times.  What is the difference between the Martin Starflash and the Starflash III??  Here is the difference...
 
Physical Size:  The Starflash III is a bit larger in size.  This is due to the plug and switch assembly being a bit larger and in a different position. 
 
Plug:  The Starflash III adds a removable IEC style plug as the standard version has a hard wired plug. 
 
Fan.  The Starflash III blows air from the rear out of the front of the unit.  The standard version pulls air in from the front and blows it out of the back.
 
Lamp Access:  The original version has an access panel on the bottom and the Version III is on the top. 
 
Electronics:  The PCB on the version III is better due to some advancements on the auto frequency sensing circuitry. 
 
Labeling: On the original version the specific model (configuration of the dichros on the dish) is screen printed on the front of the unit.  On the Starflash III it just states Starflash no matter what model it is.  You have to either look at the Martin Serial number sticker (if it is still on the unit and has not come off or is unreadable) or open the unit up to see what unit it is (or simply turn it on). 
 
They both use the same lamp and have a 3 position switch so minimal improvements are on the version III.  Both are great units and will almost last forever.  The DJ Series is the very first version of the starflash and was only available in multicolor.  The Starflash units replaced the Rainbow and Ministar units which used the common 24 volt, 250 watt lamp and were much heavier and bulkier.