Kreluz Tornado 'Tree Light' Unit

Classic 'Tree Light' style unit from Kreluz.  The unit is similar to the Kremesa CR-20L units but this one is built much better and sturdier.  The unit features 20 - GE 4515 6 volt, 30 watt 4515 bulbs mounted in 4 columns of 5 bulbs - 90 degrees off from each other.  This creates the single lamp circuit for control.  The unit can also be fitted with GE 12 volt, 30 watt 4505 bulbs for 2 channel lamp circuit operation.  The unit rotates at 40 RPM from a super high quality Crouzet gear head motor.  The fixture has separate circuits for the lamps and motor so the lamps can be run with or without the motor running and also the unit can be put on a chaser without damaging the motor assembly.  The unit also features a removable mounting plate for easier ceiling installation.  Great unit made in Spain!

Kreluz L-30/10/20-F Sweeper / Waver

Another great unit from Kreluz.  This is the L-30/10/20-F Sweeper / Waver unit.  The unit has 10 lamps that swivel and rotate back and forth.  The lamps wave at 10 RPM and the swivel at 30RPM.  The output is beams the go up and down and shift side to side.  Each bulb on the unit is a GE 12 volt, 30 watt sealed beam glass 4416 par 36.  Separate circuits for each motor and lamp circuit.  Color of the beams are white but gels can be added for coloring of the beams.  Per the catalog it appears there was a dedicated controller for this unit but unfortunately it did not come with the unit.  Great unit made in Spain.

Kreluz Triton 2 UFO Units

Awesome units from Kreluz! These are the Triton 2 UFO units.  Each unit has a central saucer containing 20 Philips 4416 12 volt, 30 watt sealed beam par 36 bulbs. The bulbs are wired into 2 separate circuits.  Circuit 1 is the 10 bulbs on the perimeter and circuit 2 is the bulbs on the top and bottom of the saucer (5 on top and 5 on bottom).  All of the bulbs are wired in series (12 volt to make the 110 / 120 volts needed per circuit) and each lamp has an LED fault indicator.  With 20 lamps this makes tracking down a faulty bulb super easy.  If a lamp goes out the LED illuminates showing the problematic lamp.  Otherwise you would have to pull each bulb and test until the faulty one is discovered.  The saucer rotates in 2 separate directions (spin and tumble).  The side tumble motor is a high quality 20 RPM Crouzet 120 volt geared motor and the spin is variable speed from another high quality Crouzet 24 volt, 60 RPM  D/C motor.  When these units get going they are crazy fast!  All circuits (4 total) are controlled from a dedicated controller.  The controller has 2 separate switches for the lamps, 1 switch for the side A/C motor and a knob to adjust the 24 volt DC motor.  Great feature it that the fuses are located on the front of the controller so if there is a fuse issue then the blown fuse can be pulled easily.  Awesome units made in Spain!