Programmi Sistemi Luce (PSL) Crown Effect Unit

Part of the great Advancer Series of units from Programmi Sistemi Luce (PSL)!  This is the Crown unit that uses a common 12 volt, 100 watt EFP lamp as the light source.  The unit has a sound active multi-colored glass color wheel that makes all of the different colors and combined colors.  The unit also features a sound active mirrored dish to make the 10 beams.  The output is 10 large beams in a tunnel configuration of multi-colored light that spin to the beat of the music.  Great unit made in Italy.  

MAP Lighting Engineering Foil Cross Laser Unit

 

Original unique laser unit from MAP.  This is the Cross unit which is part of the Foil Series produced from MAP Lighting Engineering.  This unit was copied by many companies but this was the original.  The unit features 8 separate 4.95 watt red laser diodes that are mounted on a central spoke assembly.  All of the spokes are mounted to 1 super high quality Micro Motor which makes the laser heads move.  The fixture has an onboard sound circuit that triggers the motor to move back and forth which then moves the laser heads in and out.  The output is an expanding / contracting laser beams in the air moving to the beat of the music.  Future plans include upgrading the laser heads for more power and different colors.  Fixture made in Italy.  

ProgramSistem Rotating Barriera Units

Great units from ProgramSistem!  These are the rotating Barriera units that are basically huge harvesters / tree lights.  Each unit features a reflector assembly (Par 46) with a capsule lamp inside.  Currently the units are fitted with 12 volt, 100 FCR watt lamps but can be fitted with any 6.35 base - 12 volt bi-pin bulb if less power is desired.  These units feature fault lamp indicators so troubleshooting a burnt out lamp is very simple.  Each unit has 2 separate lamp circuits so additional effects can be achieved by turning them  on and off at different times.   The lights can be colored by adding gel to the outer frame on the lamp housing.  The motor is also on a separate circuit so the lamps can be flashed on and off without damaging the motor.  The great feature about these units is that they can be used horizontally or vertically.  The metalwork / bases were designed for either position.  Awesome units made in Italy!